|
|
Books ( Chapter | Publications
| Conferences | Top )
Analysis and Testing of Adhesives, authored with G.P. Anderson
and J.B. Bennett, Academic Press, New York, NY, 1978
Treatise on Adhesion and Adhesives, Ed. with G.P. Anderson in memoriam of
Robert L. Patrick (Deceased), Vol. 6, Marcel Dekker Inc., New York, NY, 1988
Chapter in Books(
Books | Publications | Conferences
| Top )
42. DeVries, K.L. and Borgmeier, P.R., Testing of Adhesives,
Chapter 11, 223-253, Handbook of Adhesive Technology, 2nd Edition, Ed. A.
Pizzi and K. Mittal, Marcell Dekker Publ. Co., NY, (2003)
41. DeVries, K. L. and Borgmeier, P.R., Interpreting Adhesive Joint Tests,
135-158, Ed. K.L. Mittal,VSP Publ. The Netherlands (2002)
40. DeVries, K. L. and Adams, Daniel O., “Mechanical Testing of Adhesive
Joints” Chapter 6. 193-234, Adhesion Science and Engineering, 836-844.
Ed. D.A. Dillard and A.V. Pocius, Elsevier Pub. The Netherlands (2002)
39. DeVries, K.L. and Borgmeier. P.B. “Testing of Adhesive Joints”,
ASM Handbook-Volume 8 Mechanical Testing and Evaluation, 836-844, ASM International,
Materials Park,Ohio, 2000, ISBN-0-97170-389-0
38. Devries, K.L. and Borgmeier, P.R. "Fracture Mechanics Analyses of
the Behavior of Adhesion Test Specimens", Adhesion Science and Technology-Mittal
Festsschrift, Ed. W.J. Van Ooij and H. Anderson, 615-640, VSP Publ. Zeist,
Netherlands, 1998
37. Borgmeier, P.R. and DeVries, K.L. “Analysis of Double Cantilever
Beam Adhesion Test Specimen,” Post Conference Proceedings of VIII International
Congress on Experimental Mechanics, 225-331, Society for Expimental Mechanics,
Bethel, Connecticut, 1997, ISBN-0-912053-54-2.
36. DeVries, K.L.and Perry, M.C., Chemodegradation (NOx), Polymeric Materials
Encyclopedia, Vol II., Ed. Joseph C. Salamone, CRC Press, New York, NY, 1996.
35. DeVries, K.L. and Borgmeier, P.R. "Testing of Adhesives," Handbook
of Adhesive Technology, Ed. A. Pizzi and K.L. Mittal, Marcel Dekker, Inc.,
New York, NY, 1994.
34. DeVries, K.L., Johnsen, C.R., and Anderson, G.P., "Mechanical Testing
of Adhesives," Chapter 5 in Physical Methods of Chemistry, Vol. VII.:
Determination of Elastic and Mechanical Properties, Ed. B. W. Rossiter and
R. C. Baetzod, pp. 223-265, John Wiley & Sons, New York, NY, 1991.
33. DeVries, K.L., Borgmeier, P.R., Chair and Co-Chair of the 11 chapter section
of "Environmental Effects." Also authored first chapter in the section,
"Adhesive and Sealants," Engineering Materials Handbook, ASM International,
Cleveland, OH, Vol. 3, 1990.
32. DeVries, K.L. and Roylance, D., "Electron Spin Resonance," Concise
Encyclopedia of Polymer Science and Engineering, Executive Ed. J.I. Kroschivitz,
J. Wiley-Interscience, New York, NY, p. 313, 1990.
31. Anderson, G.P., Chandapeta, S., DeVries, K.L., "Effect of Removing
Eccentricity from Button Tensile Adhesion Tests," Adhesively Bond Joints:
Testing Analysis and Design, Ed. W. S. Johnson, S.T.P., ASTM, Philadelphia,
PA, 981, Chapter 1, p. 5, 1990.
30. Anderson, G.P., DeVries, K.L., "Predicting Strength of Adhesive Joints,"
from Test Results Structural Integrity - Theory and Experiment, Ed. E.S. Folias,
Kluwer Academic Publishers, Dordrect, Netherlands, p. 191, 1989.
29. Borgmeier, P.R., DeVries, K.L., Strozier, J.K., Anderson, G.P., "Evaluation
of the Strength and Mode of Fracture of Standard Lap Joints With and Without
Initial Large Debonds," Mechanics of Plastics and Plastics Composites,
Ed. V.K. Stokes, ASME, New York, NY, p. 151, 1989.
28. Salisbury, D.M., DeVries, K.L., "Environmental-Stress Considerations
in Designing with Polymers," Mechanics of Plastics and Plastics Composites,
Ed. V.K. Stokes, ASME, New York, NY, p. 191, 1989.
27. Anderson, G.P., DeVries, K.L., "Analysis of Bond Strength Tests,"
Treatise Adhesion and Adhesives, Ed. R.L. Patrick, Guest Eds. K.L. DeVries
and G.P. Anderson, Dekker, New York, NY, p. 55, 1988.
26. Strozier, J.K., Ninow, K.J., DeVries, K.L., Anderson, G.P., "Evaluation
of Mode II Adhesion Tests," Adhesion Science Review, Eds. H.F. Brinson,
J.P. Wrightman and T.C. Ward, Virginia Tech Center Publishing, Blacksburg,
VA, Chapter 8, 1988.
25. Anderson, G.P., Brinton, D.H., Ninow, K.J. and DeVries, K.L., "A
Fracture Mechanics Approach to Predicting Bond Strength," Advances in
Adhesively Bonded Joints, Eds. S. Mall, K.M. Liechti and J.K. Vinson, ASME,
New York, NY, pp. 93-101, 1988. Proceedings of a Conference at the Winter
Annual Meeting of ASME, November 27-December 2, 1988, Chicago, IL.
24. Hornberger, L.E., DeVries, K.L., "The Effect of Heat Treatment on
Fatigue Crack Growth in Polycarbonate," Fatigue 87, Engineering Materials
Advisory Services Ltd., West Medlank, U.K., Vol. III, 1988.
23. Anderson, G.P., Chandapeta, S., DeVries, K L., "Effect of Removing
Eccentricity from Button Tensile Adhesion Tests," Adhesive Bonded Joints,
Testing, Analysis and Design, Ed. W.S. Johnson, ASTM, Philadelphia, PA, STP
981, Chapter 1, 1988.
22. DeVries, K.L., Roylance, D. K., "Electron Spin Resonance," Encyclopedia
of Polymer Science and Engineering, Eds. M. Mark, N. Bikales and C. Overberger,
John Wiley and Sons, 2nd Ed. Vol. 5, pp. 687-724, 1986.
21. DeVries, K.L., Nuismer, R.J., "Fracture Mechanics of Polymers,"
Applied Polymer Science, Eds. R.W. Tess and G.W. Preheilm, ACS Press, Washington,
D.C., 2nd Ed. Chapter 13, pp. 277-305, 1985.
20. Anderson, G.P., DeVries, K.L., Sharon, G., "Evaluation of Tensile
Tests for Adhesive Bonds," Delamination and Debonding of Materials, Ed.
W.S. Johnson, ASTM STP 876, ASTM, Philadelphia, PA, Chapter 6, pp. 115-140,
1985.
19. Anderson, G.P., DeVries, K.L., Sharon, G., "Evaluation of Adhesive
Test Methods," Adhesive Joints, Ed. K.L. Mittal, Plenum Publication,
New York, NY, 1984.
18. DeVries, K. L., "State of the Art: Mechanics,” Reliability
of Adhesive Bonds Under Severe Environment, Ed. S. Gratch, National Materials
Advisory Board, National Research Council, Washington, D.C., 1984.
17. DeVries, K.L., Knutson, M., F. Koblitz, F. "Friction and Wear of
Dental Adhesives," Biomedical and Dental Applications of Polymers, Eds.
C.G. Gebelstein and F. Koblitz, Plenum Press, 1981.
16. Editorial Introduction (Invited) to Biomedical and Dental Applications
of Polymers, Eds. C.G. Gebelstein and F. Koblitz, Plenum Press, 1981.
15. DeVries, K.L., Igarashi, M., "An ESR Investigation of Environmental
Effects on Nylon Fibers," Polymer Characterization by ESR and NMR, Eds.
A.E. Woodward and F. A. Bovey, ACS, Washington, D.C., Chapter 2, 1980.
14. DeVries, K.L., "Discussion of Fatigue Mechanisms in Plastics,"
Fatigue Mechanisms, Ed. J. T. Fong, ASTM-STP-675, Philadelphia, PA, pp. 491-498,
1979.
13. DeVries, K.L., Anderson, G.P., "Analysis and Design of Adhesive Bonded
Joints," Bonded Joints and Preparation for Bonding, AGARD Series 102,
NATO, Chapter 3, 1979.
12. DeVries, K.L., Gustaveson, D., Smith, R., "Review of Experimental
Investigations of Molecular Phenomena Associated with Fracture in Polymers,"
Durability of Macromolecular Materials, Ed. R.K. Eby, ACS Publishing, Washington,
D.C., Chapter 14, 1979.
11. DeVries, K.L., "Measurements of Chain Scission," Organic Polymer
Characterization, National Academy of Sciences, Washington, D.C., Appendix
6B, 1977.
10. DeVries, K.L., "Structure-Property Relationships in Multiphase Acrylic
Biopolymers, Advances in Engineering Sciences," Society of Engineering
Science, Ed. G. Sih, pp. 161-172, 1977.
9. DeVries, K.L., "Comments on Physical Aging in Amorphous Glassy Polymers,"
The Glass Transition and the Nature of Glassy State, Eds. M. Goldstein and
R. Sinha, Annals of the New York Academy of Science, NY, 1976.
8. DeVries, K.L., Williams, M.L., "Mechanisms of Adhesion and Cohesion
at Interfaces," The Cutting Edge--Interfacial Dynamics of Cutting and
Grinding, American Association for Advancement of Science, Washington, D.C.,
Chapter 2, p. 760, 1976.
7. DeVries, K.L., Lloyd, B.A., Wilde, T., "Molecular Correlations with
Fracture in Fibers and Granular Filled Composites," Composite Reliability,
STP-580-American Society for Testing and Materials, Philadelphia, PA, 1975.
6. DeVries, K.L., Simmons, E.R., "Ozone in Polymer Chemistry: Ozone and
Elastomers," Ozone Chemistry and Technology, Eds. J.S. Murphy and J.R.
Orr, Franklin Institute Press, Philadelphia, PA, Chapter IX, 1975.
5. DeVries, K.L., Williams, M.L., "Micromechanics of Fracture Initiation
in Highly Oriented Polymers," The Solid State of Polymers, Eds. P.H.
Geil, E. Baer and Y. Wada, p. 691, 1974.
4. DeVries, K.L., Williams, M.L., "EPR-Atomic Scale Experimental Stress
Analysis," Advanced Experimental Techniques in the Mechanics of Materials,
Eds. P.H. Francis and U.S. Lindholm, Gordon and Beach Publishers, Ltd., London,
p. 69, 1973.
3. Brown, R., DeVries, K.L., Williams, M.L., "Molecular Bond Rupture
Associated with Chemical Bond Rupture in Elastomers," Polymer Network,
Eds. A.J. Chompff and S. Newman, Plenum Press, NY, Chapter 10, 1972.
2. DeVries, K.L., Simonson, E.R., Williams, M.L., "EPR Investigation
of Molecular Bond Rupture Due to Ozone in Deformed Rubber," Plastic Deformation
of Polymers, Ed. A. Peterlin, Marcel Dekker, Inc., New York, NY, 1971.
1. Williams, M.L., DeVries, K.L., "An EPR Investigation of Newly-Formed
Fracture Surfaces," 14th Sagamore Army Materials Research Conference,
University of Syracuse Press, Chapter 4, 1968.
Publications(Book
| Chapter | Conferences
| Top )
114. Shelley, J.S., DeVries, K.L., “Degradation of Nylon-6.Clay
Nanocomposites in NOx” Experimental Mechanics, 42-1, 1-4, 2002.
113. Shelley, J.S., Mather, P.T., DeVries, K.L., “Reinforcement and
Environmental Degradation of Nylon-6 Clay Nanoconposites”, Polymer ,
42, 5840-5858, 2001.
112. Coates, J., DeVries, K.L. , "Effects of Stress and Sulfur Dioxide
on Spectra©" Polymer , 41, 4661, 2000.
111. Burkholz, J.K., DeVries, K.L., “NOx and Mechanical Degradation
of Blow Extruded Nylon-6 Film,” Journal of Plastic Film and Sheeting,
14-1, 461, 1998.
110. Lunsford, R. and DeVries, K.L., “Degradation of Natural Rubber
in Aggresive Environments,” University of Utah Journal of Undergraduate
Research, 8, 35, 1998.
109. Coates, J., and DeVries, K.L., “Environmental Stress Degradation
of Ultra-high Strength Polyethylene Fibers,” Bull. Amer. Phys. Soc.,
43-1, 688, 1998.
108. Rusmee, P., and DeVries, K.L., “Geometric Dependency of Mechanical
Properties of EPS Foams,” Bull. Amer. Phys. Soc., 43-1, 146, 1998
107. Borgmeier, P.R. and DeVries, K.L., "The Use of Fracture Mechanics
to Predict Adhesive Joint Behavior," Proceedings of 20th Annual meeting
of the Adhesion Society, Ed. L.T. Drzal and H.P. Schreiber, ISSN 1086-9506,
VPI, Blacksburg, VA, 1997.
106. Perry, M.C., Vail, M.A., and DeVries, K.L., “Effect of NOx, Environments
and Stress on Degradation of Mechanical Properties of Kevlar® 49 and Nylon
6,” Polymer Engineering and Science, 35, 411-418, 1995.
105. Perry, M.C., Vail, M.A., and DeVries, K.L., "Degradation of Highly
Oriented Polymers Under Stress in Aggressive Environments," accepted
for publication in Journal of Polymer Science, 1994.
104. Borgmeier, P.R. and DeVries, K.L., "A Fracture Mechanics Analysis
of the Effects of Tapering Adherends on Strength of Adhesive Lap Joints,"
Journal of Adhesion, Science and Technology 7:953, 1993.
103. Smith, L.V. and DeVries, K.L., "Mechanical Properties of Fibers
Exposed to Stress in NOx Environment," Polymer 34:546, 1993.
102. Lee, C.S., Magda, J.J., DeVries, K.L., and Mays, J.W., "Measurements
of the Second Normal Stress Difference for Star Polymers with Highly Entangles
Branches," Macromol. 25:4744, 1992.
101. Mertlich, G.B., Quaal, S.J., Borgmeier, P.R., and DeVries, K.L., "Effect
of Increased Intra-Aortic Balloon Pressure on Catheter Volume: Relationship
to Changing Altitudes," Critical Care Medicine 20:297, 1992.
100. Magda, J.J., Lou, J., Baek, S.G., and DeVries, K.L., "Second Normal
Stress Difference of a Boger Fluid," Polymer 32:2000, 1991.
99. Magda, J.J., Baek, S.G. and DeVries, K.L., "Shear Flow of Liquid
Crystal Polymers: Second Normal Stress Difference Measurements and the Doi
Molecular Theory," Macromol. 24:4460, 1991.
98. Magda, J.J., Baek, S.G., DeVries, K.L., and Larson, R.G., "Unusual
Pressure Profiles and Fluctuations During Shear Flows of Liquid Crystal Polymers,"
Polymer 32:1794, 1991.
97. Shan, Y., Boehm, R.F., and DeVries, K.L., “Density Distribution
in Quenched Polymers," Polymer, 31:935, 1990.
96. DeVries, K.L. and Hornberger, L.E., "Macroscopic, Microscopic and
Molecular Aspects of Fracture in Polymers," Polymer Degradation and Stability,
24:213, 1989.
95. Anderson, G.P. and DeVries, K.L., "Predicting Strength of Adhesive
Joints from Test Results," International Journal of Fracture, 39:19,
1989.
94. DeVries, K.L., "Adhesives Science and Technology - A.J. Kinloch,"
a book review, International Journal of Fracture, 38:65, 1988.
93. Hornberger, L. and DeVries, K.L., "The Effects of Residual Stress
on the Mechanical Properties of Glassy Polymers," Polymer Engineering
and Science, 27:1473, 1987.
92. Anderson, G.P., Abrahamson, L.P., and DeVries, K.L., "Stress Analysis
of the Cracked-Lap-Shear Specimen," Journal of Testing and Evaluations,
Ed. W.S. Johnson, 303, November 1987.
91. Hu, C.Z., DeVries, K.L., and Andrade, J.D., "Electrical Conductivity
and Electron Spin Resonance Studies of Pyrolyzed Polyamide," Polymer,
28:663, 1987.
90. Anderson, G.P. and DeVries, K.L., "Predicting Bond Strength,"
Journal of Adhesion, 23:289, 1987.
89. Strozier, J.K., Ninow, K.J., DeVries, K.L., and Anderson, G.P., "Tensile
and Shear Stresses Induced in Adhesive Shear Test Specimens," Journal
of Adhesion, Science and Technology, 1:209, 1987.
88. Fan, G., Hornberger, L., and DeVries, K.L., "Effect of Thermal Treatment
on Impact Strength of Polycarbonate," Journal of Applied Physics, 60:2678,
1986.
87. Anderson, G.P., Abrahamson, L.P., and DeVries, K.L., "Stress Analysis
of the Cracked Lap Shear Specimen in ASTM Round Robin," NASA Technical
Memorandum 89006, Ed. W.S. Johnson, NASA, Hampton, VA, p. 22, 1986.
86. DeVries, K.L., Gramoll, K.G., Anderson, G.P., "Analysis of Adhesive
Tensile Test Methods," Polymer Engineering and Science, 26:962, 1986.
85. DeVries, K.L., Igarashi, M., and Chao, F., "Molecular Degradation
of Polymers," Journal of Polymer Science, 72:111, 1985.
84. Miles, H.W., DeVries, K.L., "Fracture Generation of Free Radicals
in Kevlar® 49 Fibers," Polymer Material Science and Engineering,
52:75, 1985.
83. DeVries, K.L., "Molecular and Microscopic Investigation of Fracture
in Polymers," Bulletin on Science and Technology for the Handicapped,
American Association for the Advancement of Science, Washington, D.C., 4[3],
1984.
82. Fordyce, P., DeVries, K.L and Franconi, B.M., "Chain Scission and
Mechanical Degradation of Polystyrene," Polymer Engineering and Science,
24:421, 1984.
81. Miles, H.M and DeVries, K.L., "Free Radicals in g-Irradiated, PETN,"
Journal of Material Science, 19:467, 1984.
80. Miles, H.M., Gustaveson, D., and DeVries, K.L., "Stress Induced Radical
Generation in TATB," Journal of Material Science, 18:3243, 1983.
79. Igarashi, M. and DeVries, K.L., "An ESR Investigation of Environmental
Effects on Polymeric Materials: 1 Nylon," Polymer, 24:767, 1983.
78. Miles, M.H., DeVries, K.L., Britt, A.D., and Moniz, W.B., "Impact
Sensitivity of g-Irradiated HMX," Propellants, Explosives and Pyrotechnics,
8:49, 1983.
77. Miles, H.M., DeVries, K.L., Britt, A.D., and Moniz, W.B., "Generation
of Free Radicals in RDX and HMX Compositions," Propellants, Explosives
and Pyrotech, 1:100, 1982.
76. Franconi, B.M., DeVries, K.L., and Smith, R.H., "Free Radicals and
New End Groups Resulting from Chain Scission: II Mechanical Degradation of
Polyethylene," Polymer, 23:1027, 1982.
75. Miles, M.H., DeVries, K.L., and Britt, A.D., "Generation of Free
Radicals in RDX and HMX," Journal of Propulsion and Explosives, 1982.
74. Miles, M.H. and DeVries, K.L., "Molecular Investigation of Damage
in Explosives and Binders," Journal of Applied Polymer Science, 27:198,
1982.
73. DeVries, K.L., Smith, R.H., and Franconi, B.M., "Free Radicals and
New End Groups Resulting from Chain Scission," Polymer, 21:949, 1981.
72. Nagamura, T. and DeVries, K.L., "ESR Studies of Free Radicals Generated
in Poly [p-(hydroxyethoxy) benzoic acid]," Polymer, 22:12167, 1981.
71. DeVries, K.L., Smith, R., and Franconi, B.M., "Response to M. Dole
Commentary," Polymer Communications, 22:1464, 1981.
70. DeVries, K.L., Smith, R.H., and Franconi, B.M., "Free Radicals and
New End Groups Resulting from Chain Scission, (1) g-Irradiation of Polyethylene,"
Polymer, 21:949, 1980.
69. Kuznicki, S.M., DeVries, K.L., and Eyring, E.M., "An ESR Study of
Titanium (III) - Exchanged Zeolite A," Journal of Physical Chemistry,
84:535, 1980.
68. DeVries, K.L., Knutson, M., and Draughn, R., "Friction and Wear of
Dental Polymeric Composite Restoratives," Organic Coatings and Plastics
Chemistry, 42:341, 1980.
67. DeVries, K.L., "Free Radical Processes in Mechano - Chemical Degradation
of Plastic and Rubber, "Journal of Applied Polymer Science, 50:439-453,
1979.
66. Koblitz, F.F., Luna, V.R., Glen, J.F., and DeVries, K.L., "Fracture
Toughness Testing of Dental Biomaterials," Polymer Engineering and Science,
19:607, 1979.
65. Nagamura, T. and DeVries, K.L., "Radical Formation and Deformation
in Poly p-[2-hydroxyethoxy] Benzoic Acid Fibers," Polymer Engineering
and Science, 19:89, 1979.
64. DeVries, K.L. and Koblitz, F.F., "Guest Editorial," Polymer
Engineering and Science, 19:65, 1979.
63. DeVries, K.L. (with other committee members) "Organic Polymer Characterization,"
published by the National Research Council, 143 pages, 1978.
62. Park, J.B., DeVries, K.L., and Statton, W.O., "Structural Changes
Caused by Strain Annealing of Nylon 6 Fibers," Journal Macromolecular
Science Physics, B15[2]: 229, 1978.
61. Park, J.B., DeVries, K.L., and Statton, W.O., "Chain Rupture During
Tensile Deformation of Nylon 6 Fibers," Journal Macromolecular Science
and Physics, B15[2]:205, 1978.
60. Anderson, G.P., Koblitz, F.F., Glenn, J. F., and DeVries, K.L., "Adhesion
to Dental Prosthetics," Journal of Adhesion, 9:213, 1978.
59. Nagamura, T. and DeVries, K.L., "Radical Formation and Deformation
in Poly [p-(2 hydroxyethoxy) benzoic acid] Fibers. Organic Coatings and Plastics
Chemistry, 38:36, 1978.
58. DeVries, K.L., (with other members of the National Materials Advisory
Board Committee on S & S for S.E.V.) "Skirts and Seals for Surface
Effect Vehicles," NMAB-340, National Research Council, Washington D.C.,
1978.
57. Koblitz, F.F., Luna, V.R., and DeVries, K.L., "Fracture Toughness
Testing of Dental Biomaterials," Organic Coatings and Plastics Chemistry,
38:323, 1978.
56. DeVries, K.L. and Roylance, D.K., "The Observations of Molecular
Bond Rupture During Fracture in Polymers," Progress in Solid State Chemistry,
8:283-335, 1977.
55. Anderson, G.P., DeVries, K.L., and Williams, M.L., "The Peel Test
in Experimental Adhesion - Fracture Mechanics," Technical Paper Yearbook,
1976, published by Thiokol Corporation, 1977.
54. Koblitz, F.F., Oshea, T.N., Glenn, J.F., and DeVries, K.L., "Amine
Polymerization Accelerators for Pour Denture Resins," Journal of Dental
Research, 56:791, 1977.
53. DeVries, K.L., "Comments on Physical Aging in Amorphous Glassy Polymers,"
The Glass Transition and The Nature of Glassy State, Eds. M. Goldstein and
R. Sinha, Annals of the New York Academy of Science, New York, NY, 1976.
52. DeVries, K.L., "Polymer Engineering, a Review," Journal of the
American Chemical Society, 98:7889, 1976.
51. Koblitz, F.F., Steen, S.D., Glenn, J.F., and DeVries, K.L., "Mechanical
Behavior of the Acrylic Tooth to Denture Base Resin," Journal of Dental
Research, 55:326, 1976.
50. Anderson, G.P., DeVries, K.L., and Williams, M.L., "The Peel Test
in Experimental Adhesive-Fracture Mechanics," Experimental Mechanics,
16:11, 1976.
49. DeVries, K.L. and Kausch, H.H., "Molecular Aspects of High Polymer
Fracture as Investigated by ESR-Techniques," International Journal of
Fracture, 11:727, 1975.
48. DeVries, K.L., "Free Radicals Generated in Rubber During Fracture,"
Rubber Chemistry and Technology, 48:445, 1975.
47. DeVries, K.L., "A Discussion of Composite Mold of Plastics,"
Polymers Engineering and Science, 15:225, 1975.
46. Anderson, G.P., DeVries, K.L., and Williams, M.L., "Mixed Mode Stress
Field Efforts," Technical Paper Yearbook, Thiokol Corp., p. 202, 1974.
45. Dunn, H.K., King, R., Andrade, J.D., and DeVries, K.L., "Polyester
Textile Bioadhesion to Muscle and Bone," Orthopedics Digest, p. 16, May
1974.
44. Bennett, S.J., DeVries, K.L., and Williams, M.L., "Adhesive Fracture
Mechanics," International Journal of Fracture, 10:33, 1974.
43. Chang, M.D., DeVries, K.L., and Williams, M.L., "Adhesive Fracture
of a Lap Shear Joint," Experimental Mechanics, 14:89, 1974.
42. DeVries, K.L. and Lloyd, B.A., "Barnacle Cement," (short note),
Journal of American Dental Association, 88:926, 1974.
41. Anderson, G.P., DeVries, K.L., and Williams, M.L., "The Influence
of Loading Direction Upon the Character of Adhesive Debonding," Journal
of Colloid and Interface Science, 47:600, 1974.
40. DeVries, K.L., Wilde, T.B., and Williams, M.L., "An Electron Paramagnetic
Resonance Study of Molecular Bond Rupture in Granular-Filled Elastomers Subjected
to Inelastic Deformation," Journal of Macromolecular Science-Physics,
B7[4]:633, 1973.
39. DeVries, K.L. and Williams, M.L., "Micromechanics of Fracture Initiation
in Highly Oriented Polymer," Journal of Macromolecular Science and Physics,
B8[3-4]:691, 1973.
38. Anderson, G.P., DeVries, K.L. and, Williams, M.L., "Finite Element
in Numerical Analysis of Adhesive Fracture," International Journal of
Fracture, 9:335, 1973.
37. Williams, M.L., DeVries, K.L., and Despain, R.R., "A Technique for
Evaluating Dental Adhesive," Journal Dental Research, 52:517, 1973.
36. Anderson, G.P., DeVries, K.L., and Williams, M.L., "The Finite Element
Method of Adhesive Fracture Mechanics," Presented in Stuttgart, Germany
on April 16 at the International Conference on the Use of the Finite Element
in Fracture Mechanics, International Journal of Fracture, 4[9]:421, 1973.
35. Lloyd, B.A., DeVries, K.L., and Williams, M.L., "Fracture Behavior
in Nylon 6 Fibers," Journal of Polymer Science, 10[A-2]:1415, 1972.
34. DeVries, K.L., Moore, N.B., and Williams, M.L., "Bond Rupture During
Ozone Cracking of Torsional Loaded Styrene-Butadiene," Journal of Applied
Polymer Science, 43:462, 1972.
33. Chang, M.D., DeVries, K.L., and Williams, M.L., "The Effects of Plasticity
in Adhesive Fracture," Journal of Adhesion, 4:221, 1972.
32. DeVries, K.L., Moore, N.B., and Williams, "Bond Rupture During Ozone
Cracking of Torsional Loaded Styrene-Butadiene," Journal of Applied Polymer
Science, 16:1377, 1972.
31. DeVries, K.L., Roylance, D.K., and Williams, M.L., "EPR Studies of
Mechanically Induced Bond Rupture in Elastomers," Journal of Polymer
Science, 10[A-2]:599, 1972.
30. Park, J.B., Statton, S., DeVries, K.L., "Observation of Chain Rupture
During Tensile Deformation and Fracture of Oriented Nylon 6 Fibers,"
Journal of Polymer Science, 10:307,1972.
29. Brown, R.T., DeVries, K.L., and Williams, M.L., "Orientation Strength
and Failure of Elastomers at Low Temperatures," Polymer Letters, 10:327,
1972.
28. DeVries, K.L. and Backman, D.K., "Rheology of Polyethylene at High
Pressures," Polymer Letters, 9, 1971.
27. DeVries, K.L., Lloyd, B.A., and Williams, M.L., "A Reaction Rate
Model for Deformation and Fracture in Polymeric Fibers," Journal of Applied
Physics, 42:4644, 1971.
26. DeVries, K.L., Roylance, D.K., and Williams, M.L., "Formation of
Free Radicals During Mechanical Degradation of Elastomers," Polymer Letters,
9:913, 1971.
25. DeVries, K.L. and Williams, M. L., "EPR--Atomic Scale Experimental
Stress Analysis," International Journal of Nondestructive Testing, 2:363,
1971.
24. Roylance, D.K. and DeVries, K.L., "Determination of Atomic Stress
Distribution in Oriented Polypropylene by Infrared Spectroscopy," Polymer
Letters, 9:443, 1971.
23. DeVries, K.L. and Williams, M.L., "The Application of Continuum Analysis
of Adhesive Fracture," American Ceramic Society Bulletin, 50:375, 1971.
22. DeVries, K.L., Roylance, D.K., and Williams, M.L., "An Experimental
Investigation of Some Models of Polymer Fracture," International Journal
of Fracture Mechanics, 70:21, 1971.
21. Becht, J., DeVries, K.L., and Kausch, H.V.S., "On Some Aspects of
Strength of Fibers," European Polymer Journal, 7:105, 1971.
20. DeVries, K.L., Simonson, E R., and Williams, M.L., "A Micro-Macro
Correlation of Ozone-Induced Fracture in Rubber," Journal of Applied
Polymer Science, 14:3049, 1970.
19. DeVries, K.L., Simonson, E.R., and Williams, M.L., "Electron Paramagnetic
Resonance Investigation of Molecular Bond Rupture Due to Ozone in Deformed
Rubber," Journal of Macromolecular Science and Physics, B3:671, 1970.
18. DeVries, K.L. and Farris, R.D., "The Effect of Strain Inhomogeneities
on Deformation and Fracture," International Journal of Fracture Mechanics,
6:411, 1970.
17. Despain, R.R., DeVries, K.L., Luntz, R.D., and Williams, M.L., "A
Study of Microscopic Degradation in Teeth," Journal of Dental Research,
49:876, 1970.
16. DeVries, K.L., Roylance, D.K., and Williams, M.L., "The Uses of Electron
Paramagnetic Resonance in Studying Fracture," Journal of Polymer Science,
8[A-1]:237, 1970.
15. DeVries, K.L. and Williams, M.L., "Atomic Structure Reveals Why Things
Break," VIA, 3, 1969.
14. Smith, J.L., DeVries, K.L., Bushnell, D.J., and Brown, W.W., "Fracture
Data and Stress-Strain Behavior of Rocks in Triaxial Compression," Fracture
Mechanics, 9:348, 1969.
13. DeVries, K.L., Simonson, E.R., and Williams, M.L., "Electron Paramagnetic
Resonance Measurements of Strain-Induced Ozone Cracking in Rubber," Journal
of Basic Engineering Transactions of the American Society of Mechanical Engineers,
91:587, 1969.
12. Backman, D.K. and DeVries, K. L., "Free Radical Formation during
Machining and Fracture of Polymers," Journal of Polymer Science, 7:2125,
1969.
11. Roylance, D.L., DeVries, and K.L., Williams, M.L., "Fracture Detection
in Polymers by Electron Paramagnetic Resonance," Fracture, Chapman and
Hall, London, 551, 1969.
10. DeVries, K.L. "Measurement of Intra-Vaginal Pressure Exercises,"
Journal of Sports Medicine and Physical Fitness, Quarterly Review, 2, 1968.
9. Rowland, S.C., DeVries, and K.L., Gibbs, P., "The Effect of Pressure
on Fatigue," International Journal of Fracture Mechanics, 3:131, 1967.
8. DeVries, K.L., Smith, J.L., Brown, W.S., and Stacey, W.C., "Properties
of Rocks Tested in One-Dimensional Compression," Experimental Mechanics,
7:426, 1967.
7. Miles, M.H., DeVries, K.L., and Gibbs, P., "Internal Friction Under
Hydrostatic Pressure," Journal of Applied Physics, 36:852, 1965.
6. DeVries, K.L., Gibbs, P., and Staten, S., "Pressure Dependence of
Creep in White Phosphorous," Journal of Applied Physics, 35:536, 1964.
5. DeVries, K.L., Baker, G.S., and Gibbs, P., "Pressure Dependence of
Creep," Bulletin of the American Physical Society, 6, 1964.
4. DeVries, K.L., Baker, G.S., and Gibbs, P., "Pressure Dependence of
Creep," Journal of Applied Physics, 34:2254, 1963.
3. DeVries, K.L. and Gibbs, P., "Pressure Dependence of Creep in Zinc
and Cadmium," Journal of Applied Physics, 34:3119, 1963.
2. DeVries, K.L., Baker, G.S., and Gibbs, P., "Pressure Dependence of
Creep in Tin," Journal of Applied Physics, 34:2258, 1963.
1. DeVries, K.L., Baker, G.S., Gibbs, P., Galli, J.R., Jones, M.R., and Seeley,
J.L., High Pressure Physics, ARL Publication 60-330, Wright Patterson Air
Force Base, Ohio, Aeronautical Research Laboratory, Air Force Research Division,
1960.
Conferences, Abstracts, and
Presentations at Technical Meetings (
Books | Chapter | Publications
| Top )
172 K. L. DeVries, “Fracture Mechanics Applied to Adhesive Joints” Presented at the Fourth International Conference on the Mechanics of Time
Dependent Materials, October 7-10, 1003, Lake Placid, NY, Conference Proceedings,
Page 20, In Cooperation with The Society of Plastics Engineers and The Society
for Engineering Mechanics, Bethel, CT, 2003
171 Van Moorhem, W.K., DeVries, K. L., and Roemer, R.D., “Developing
Future Engineering Educators”, 2001 ASEE Annual Conference Program and
Proceedings, page123, Albuquerque, NM, Oral Presentation and Poster, June
24-27, 2001
170 Rusmee, P. and DeVries, K. L., "Difficulties in Determing the Mechanical
Properties of EPS Foam", Abstracts of the SEM X International Conference
on Experimental Mechanics, 106-107, June 4-6, 2001, Portland, OR; Full paper
appears in Proceeding of the SEM IX Annual Conference, Page 540-543, Pulb.
SEM, Bethel, CT, (2001)
169 Rusmee, P. and DeVries,K. L., “Mechanical Properties of EPS Foam
Do not behave as Material Constants”, Presented at March 12-16, 2001
Meeting in Seattle. WA, Bull. Amer. Phys. Soc., 46-1, 709, 2001
168 DeVries, K.L. and Borgmeier, P. R, “Stress Distribution in and Failure
of Standard Adhesive Joints”, ICTAM 2000. Chicago, IL 27 August 28,
2000, Book of Abstracts p. 70, International Union for Theoretical and Applied
Mechanics, (2000)
167 Vail, MA, and DeVries, K. L. "Molecular Modeling of Macroscopic Failure
in Polymers", Proceedings of the SEM IX International Conference on Experimental
Mechanics, Pulb. SEM, Bethel, CT, June 5-8, 2000, Orlando Florida
166 Shelly, J. S. and DeVries, K. L. "Degradation of Nylon-6/Clay Nanocomposites
In NOx", Proceedings of the SEM IX International Conference on Experimental
Mechanics, Pulb. SEM, Bethel, CT, June 5-8, 2000, Orlando Florida
165. Borgmeier, P. R. and DeVries, K. L., "Interpreting Adhesive Joint
Tests", Second International Symposium on Adhesive Joints, Pg 1, Robert
Treat Hotel, Newark NJ. May, 22-24, 2000,
164. Shelly, J. and DeVries, K.L., "Environmental/Mechanical Effects
on Nano-Structured Polymers", Invited Lecture, Roger S. Memorial Symposium-Recent
Advances in Polymer Science & Engineering. Asliomar Conference Center,
Pacific Grove, CA, Feb. 4-6, 2000
163. Borgmeier, P. and DeVries, K.L., “Predicting the Behavior of Adhesive
Joints,” American Institute of Chemical Engineers-1998 Annual Meeting,
Miami, FL. Preprints and extended abstracts, 119J, AIChE, New York, NY (1998).
162. DeVries, K.L., Coates, J., and Burkholz, K.L., “Experimental Measurement
of Molecular Phenomena Associated with Macroscopic Failure”, Proceedings
of the SEM Spring Conference on Experimental and Applied Mechanics, 475. Society
for Experimental Mechanics, Inc., Bethel, CN, 1998.
161. DeVries, K.L. “Environmental Consideration in Designing with Polymers,” Invited Lecture-International Conference on Rubbers, Calcutta, India, December
12-14, 1997. Also delivered an address at Valedictory Function.
160. DeVries, K.L., Burkholz, J.M., Coates, J.M. and Lunsford, R. “Environmental
Considerations in Designing with Polymers”, Proceedings of the International
Conference on Rubbers, Vol. III p. 69, Ed. P.R. De, A.K. Bhowmick and S.K.
De, Rubber Technology Center, Indian Institute of Technology, Kharagpur, India,
1997
159. Burkholz, J.K. and DeVries, K.L. “Environmental Stress-Degradation
of Unoriented Nylon 6 Films,” Bulletin of the American Physical Society
42, 47 (1997), accompanied presentation at APS/DHPP Annual Meeting, Kansas
City, MO, March 17-21, 1997.
158. Perry, M.C. and DeVries, K.L. “Accelerated Durability of Fibers
Exposed to Atmospheric Pollutants,” Proceedings of the SEM Spring Conference
on Experimental Mechanics, 136-137, Society of Experimental Mechanics, Bethel,
Connecticut (1997), accompanied oral presentation at Bellevue, WA, June 2-4,
1997.
157. DeVries, K.L. and Borgmeier, P.R. “Analysis of Double Cantilever
Adhesive Test Specimens,” VIII International Congress on Experimental
and Applied Mechanics, Nashville, TN, June 10-13, 1996.
156. DeVries, K.L. and Borgmeier, P.R. “Analysis of Double Cantilever
Adhesive Test Specimens”, Proceedings of the VIII International Congress
on Experimental Mechanics, p. 304-305, Society for Experimental Mechanics,
Bethel, CT, 1996.
155. Vail, M.A. and DeVries, K.L. “The Combined Effect of NOx and Stress
on Chain Scission and Mechanical Properties of Oriented Semi-Crystalline Nylon
Six Fillers,” Mechanics of Plastics and Plastic Composites MD, Vol.
66, p. 78-88 ASME, 1995. Proceeding of conference accompanying lecture at
ASME-WAM, San Francisco, CA, November 15-16, 1995.
154. DeVries, K.L. and Borgmeier, P.R. “Prediction of Failure in Polymeric
Adhesive Joints,” Invited Lecture- First International Congress on Adhesion
Science and Technology, p. 6 of Abstract Book, Amsterdam, Netherlands, October
16-20, 1995 (also to be published by Journal of Adhesion Science and Technology,
VSP, Utrecht, Netherlands).
153. Borgmeier, P.R. and DeVries, K.L. “Prediction of Locus of Failure
in Polymeric Adhesives,” Proceedings of the Material Research Society
1995 Spring Meeting, p. 274, April 1995.
152. Perry, Mark C. and DeVries, K.L., "Aramid Fiber Strength and Modulus
in NOx,"First International Conference on Engineering Composites, Ed.
D. Hui, p. 395, University of New Orleans Press, New Orleans, LA, 1994.
151. Hornberger, Lee, Rusmee, P., and DeVries, K.L., "An Experimental
Investigation of Impact in Plastics”, Proceedings of the 1994 Spring
Conference of the Society of Experimental Mechanics, p. 650, SEM, Bethel,
CT, 1994.
150. Perry, M.C. and DeVries, K.L., "Creep Rupture Lifetime Statistics
for Kevlar® Single Fibers Exposed to Gaseous NOx," Proceedings of
the Twelfth U.S. National Congress of Applied Mechanics, Abstract, p. 560,
accompanied presentation, University of Washington, Seattle, WA, 1994.
149. DeVries, K.L. "Testing and Evaluation of Adhesives," two 1.5
hour lectures in the CPA Workshop Adhesion Science and Technology, Ed. K.
Mittal, East Brunswick, NJ, June 13-15, 1994 (published in workshop manual).
148. Perry, M.C., Vail, M.A. and DeVries, K.L., "Degradation of Highly
Oriented Polymers Under Stress in Aggressive Environments," proceedings
of the 39th International SAMPE Symposium, Volume 39, Book 2, Ed. Ken Drake,
Jerry Bainer, Ti To Serafine and Paul Chang, p. 2206, Society for the Advancement
of Materials Processing Engineering, Covina, CA, 1994.
147. Perry, M.C., Vail, M.A., and DeVries, K.L., "Effect of Nox Environment
and Stress of the Degradation of Mechanical Properties of Kevlar® 49 and
Nylon 6", presented at the ASME Winter Annual Conference, New Orleans,
LA, December 1, 1993 (published in proceedings).
146. DeVries, K.L., Vail, M.A., and Perry, M.C., "Mechanical Property
Degradation of Polymers Exposed to Stress in Aggressive Environments," invited lecture at 1993 APS Spring Meeting in Seattle, WA, March 25, 1993.
145. DeVries, K.L., Vail, M.A., and Perry, M.C., "Mechanical Property
Degradation of Polymers Exposed to Stress in Aggressive Environments," Bulletin of the American Physical Society 38:656, 1993.
144. Smith, L.V., Vail, M.A., and DeVries, K.L., "Effects of Environmental
Pollutants on Long Term Mechanical Properties of Polymeric Fibers," ECO-World
'92 Conference, June 14-17, Washington, D.C., organized by ASME and other
professional societies. Abstract published in proceedings, p. 293, 1992.
143. Smith, L.V. and DeVries, K.L. "Mechanical Properties of Polymeric
Fibers Exposed to Stress in an NOx Environment," Bulletin of the American
Physical Society 37:676, 1992.
142. DeVries, K.L., Magda, J.J., Baek, S.G., and Larson, R.G. “Shear
Flow Stability of Liquid Crystal Polymers,” Specialty Polymer '90 Abstracts,
accompanied presentation, Baltimore, MD, August 3-10, 1990.
141. Magda, J.J., Baek, S.G., and DeVries, K.L., “Experimental Study
of the Stability of Shear Flows of Liquid Crystal Polymers,” Bulletin
of the American Physical Society, 35:507, 1990.
140. Shan, Y., Boehm, R.F., and DeVries, K.L., "The Density Distribution
in Quenched Polystyrene," Bulletin American Physical Society, 34:525,
1989.
139. Magda, J.J., Baek, S.G., Larson, R.G., and DeVries, K.L., “The
Three Viscometric Functions for a Liquid-Crystalline Polymer,” 61st
Annual Meeting of the Society of Rheology, Montreal, October 23, 1989.
138. Magda, J.J., Baek, S.G., and DeVries, K.L., “Changes in the Rheology
of a Polymer Solution Associated with the Transition to a Liquid-Crystalline
State,” AIChE Annual Meeting, San Francisco, CA, November 7, 1989.
137. Borgmeier, P.R., Strozier, J.K., DeVries, K.L., and Anderson, G.R., “An
Investigation of the Effects of Tapering on Stress Distribution and Strength
in Lap Shear Joints,” Society of Engineering Science 26th Annual Meeting
(Abstract), University of Michigan Press, Ann Arbor, MI, p. 19, 1989.
136. DeVries, K.L. and Hornberger, L.E., "Macroscopic, Microscopic and
Molecular Aspects of Fracture," Makro, Chem. Symp., 27:155, 1989.
135. DeVries, K.L., Salisbury, D.M., and Miles, H.M., "Environmental-Stress
Degradation of Kevlar®," Polymeric Materials Science and Engineering
58:75, 1988. Paper in this proceedings accompanied invited presentation in
the Symposium on Environmental Degradation and Stabilization of Polymers.
ACS Annual Meeting in Toronto, Canada, June 5-10, 1988.
134. DeVries, K.L. and Hornberger, L.E., "Experimental Study of Molecular,
Microscopic and Macroscopic Mechanisms of Strength in Polymers," An Invited
Main Lecture at the IUPAC Meeting Chemical and Physical Phenomena in Aging
of Polymers, Prague, Czechoslovakia, also published in Conference Proceedings,
1988.
133. Carter, P.T., Johnsen, C.R., and DeVries, K.L., "A Simple Device
for Experimentally Investigating Environmental Embrittlement," Proceedings
Applied Mechanics and Engineering Science Conference, pp. 18, 1988. Accompanied
a presentation at the ASME and SES Applied Mechanics and Engineering Science
Conference at the University of California at Berkeley, June 20-22, 1988.
132. Hornberger, L.E. and DeVries, K.L., "The Effect of Heat Treatment
on Fatigue Crack Growth in Polycarbonate," Fatigue '87, Vol. III, Ed.
R.O. Ritchie and E.A. Stocke, Jr., EMAS, Warley, West Midlands, U.K., p. 130,
1987.
131. Anderson, G.P. and DeVries, K.L., "Predicting Strength of Adhesive
Joints from Test Results," Abstract, Proceedings of 24th Annual Meeting,
Society of Engineering Science, 33, 1987.
130. Miles, H.M. and DeVries, K.L., "Electron Paramagnetic Studies of
Molecular Failure of Polymers," Abstract, Proceedings of 24th Annual
Meeting, Society of Engineering Science, 53, 1987.
129. DeVries, K.L., "Performance and Durability of Adhesive Joints," Presentation at Adhesion Science and Technology Conference, paper appeared
in Published Proceedings, East Brunswick, N.J., September 14, 1987.
128. DeVries, K.L., "Testing Adhesive Joints," Presentation at Adhesion
Science Conference, paper appeared in Conference Handbook, San Francisco,
CA., September 28, 1987.
127. Salisbury, D.M. and DeVries, K.L., "Effect of Moisture and Diffusion
on NOx-Stress Degradation of Nylon 6/6 Fibers," Conference Proceedings
45th Annual Meeting Society of Plastic Engineers, 33:491-493, 1987.
126. Strozier, J.K., Ninow, K.J., DeVries, K.L., and Anderson, G.P., "Evaluation
of Mode II Adhesion Tests, Proceedings of the VPI and SU 5th Annual Adhesion
Workshop, pp. 124-152, 1987.
125. Anderson, G. P., DeVries, K.L., and Chandapeta, S., "Effects of
Laboratory Procedures on Tensile Adhesion Test Data," Adhesively Bonded
Joints: Testing, Analysis and Design Abs, 2, American Society for Testing
of Materials, Philadelphia, PA 1986. Symposium held in Baltimore, MD, September
10-12, 1986.
124. Hu, C.Z., Andrade, J.D., and DeVries, K.L., "Electrical Conductivity
and Electron Spin Resonance Studies of Pyrolyzed Polyimide," Proceedings
of the Conference Electroactive Polymers, 28:663-668, 1987. The Johns Hopkins
University, Baltimore, MD 1986. This is an abstract of a paper presented at
this conference.
123. DeVries, K.L. and Murthy, S., "Environmental Stress Cracking in
Rubbers and Other Polymers," Proceedings of the International Conference
on Rubbers and Rubber Like Materials, Rubber Tech. Centre, Kharagpur, India.
This is a paper that accompanied my invited presentation at the conference
in Jamshedpur India.
122. Hornberger, L.E. and DeVries, K.L., "Measurement of Favorable Residual
Stresses in Polycarbonate," Proceedings SEM Conf. on Experimental Mechanics,
27:94-98, 1987, Society of Experimental Mechanics, Bethel, CT, 1986.
121. Hornberger, L. E., Fan, G., DeVries, K. L., Draughn, R. A., and Ryan,
J.E., "Thermal Processing to Improve the Dental Properties of Dental
Resins," Journal of Dental Research 65:208, 1986. This special issue
of the JDR included papers from the International Association for Dental Research
64th Annual Meeting, the Hague Netherlands, June 26, 1986. A more detailed
version is available on microfilms from the Dental Materials Group, IADR,
P.O. Box 17183, Louisville, KY, 40217.
120. Salisbury, D. M. and DeVries, K.L., "Environmental Stress Degradation
in Rubbers," Bulletin of American Physical Society, 31:365, 1986.
119. Knutson, M. and DeVries, K.L., "Friction, Wear and Fracture Toughness
in a Filled Epoxy," Bulletin of American Physical society, 31:366, 1986.
118. Hornberger, L. and DeVries, K.L., "The Effects of Residual Stress
on the Mechanical Properties of Glassy Polymers," ANTEC Conference Proceedings,
Society of Plastic Engineers, Brookfield, CT, p. 672, 1986.
117. DeVries, K.L., Anderson, G.P., and Gramoll, K., "Failure Analysis
of Standard Adhesive Test Specimens," Abstracts of Society of Engineering
Science Annual Meeting, 22:69, 1985. Complete manuscript in preprints - 23,
ESP 22/85032 Available from SES Penn State University, University Park, PA.
116. DeVries, K.L., Anderson, G. P. and K. C. Gramoll, "Analysis of Adhesive
Test Methods," Proceedings of the 43rd Annual Conference of the Society
of Plastics Engineers, p. 262, Brookfield, CT, 1985.
115. DeVries, K.L., "Evaluation and Testing of Adhesives," Proceedings
of Adhesion Science and Technology Short Course, Ed. K. L. Mittal, CPA, East
Brunswich, NJ, 1985.
114. DeVries, K.L., "Predicting Practical Bond Strength," Proceedings
of Adhesion Science and Technology Short Course, Ed. K. L. Mittal, CPA, East
Brunswich, NJ, 1985.
113. Miles, H. M., Jones, J.L., and DeVries, K. L., "An ESR Investigation
of Free Radicals Produced in Kevlar® by Kinking," Bulletin of American
Physical Society, 30:388, 1985.
112. DeVries, K.L., "Testing and Failure Analysis of Adhesives," Fundamentals of Adhesion, State University of New York, New Paltz, NY, October
10-12, 1984.
111. DeVries, K.L., "Designing with Adhesives," Materials Science
Conference, Sponsored by Sperry Univac Corporation, Park City, Utah, September,
1984.
110. Murthy, S., DeVries, K.L., "Environmental Effects on Plastics," Material Science Conference, Sponsored by Sperry Univac Corporation, Park
City, Utah, September 1984.
109. DeVries, K.L., Murthy, S., "The Impact of Environment on the Mechanical
Properties of Polymers," Tenth Meeting of the Pan American Congress of
Mechanical and Electrical Engineers, Buenos Aires, Argentina, October 1-5,
1984.
108. DeVries, K. L., Murthy, S., and Igarashi, M., "Environmental Crystalline
Polymers," ASME Paper 84-WA/MAT-27, ASME, NY, 1984.
107. Chao, F., Murthy S., and DeVries, K.L., "A Comparison of Experimental
Methods of Measuring Molecular Degradation in Polystyrene," Bulletin
of American Physical Society, 29:531, 1984.
106. DeVries, K.L., et al., "Advances in the Mechanisms of Adhesive Joints," National Materials Advisory Board Workshop of Reliability of Adhesive Bonds
under Severe Environments, National Research Council, Washington D.C., May
1984.
105. Anderson, G.P., DeVries, K.L., and Sharon, G., "Evaluation of Tensile
Tests for Adhesive Bonds," Abstracts for Symposium on Delamination and
Debonding of Materials, ASTM, Philadelphia, PA, p. 7, 1983.
104. DeVries, K.L., "Testing of Adhesive Joints," Presentation at
Adhesion Science and Technology, San Francisco Airport Plaza, CPA, November
10-12, 1983.
103. DeVries, K.L., "Performance and Durability of Adhesive Joints," Presentation at Adhesion Science and Technology, San Francisco Airport Plaza,
CPA, November 10-12, 1983.
102. DeVries, K.L., "Evaluation and Testing of Adhesives - Predicting
Practical Bond Strength,” Proceedings on Adhesion Science and Technology,
Section F, Center for Professional Advancement, East Brunswick, NJ, 1983.
101. Anderson, G.P. and DeVries, K.L., "Stress State in Lap Shear Specimens," The Adhesion Society Newsletter-Technical Papers, 6, 1983.
100. DeVries, K.L., Igarashi, M., and Chao, F., "Molecular Degradation
of Polymers," Milestones and Trends in Polymer Science and Technology,
6, Michigan Molecular Institute, Midland, MI, 1983.
99. DeVries, K.L., Fordyce P.D., and Franconi, B.M., "Bond Rupture Produced
by Mechanical Degradation of Polystyrene," Bulletin of American Physical
Society, 28:515, 1983.
98. Miles, M.H., Dickinson, J.T., and DeVries, K.L., "Molecular Decomposition
of Polymeric Binders and Energetic Materials," Organic Coatings and Applied
Polymer Science Proceedings, 48:516, 1983.
97. DeVries, K L. and Anderson, G.P., "Stress Analysis of a Cracked-Lap-Shear
Specimen," second paper in the ASTM E24.04.09 Round Robin on Crack Growth
in Adhesives, San Francisco, CA, December 12-13, 1982.
96. Anderson, G.P., DeVries, K.L., and Sharon, G., "Evaluation of Adhesive
Test Methods, " Organic Coatings and Applied Polymer Science Proceedings,
47:462, 1982.
95. Franconi, B.M., McKenna, G.B., DeVries, K.L., and Smith, R.H., "Chain
Scission and Mechanical Degradation of Polyethylene," IUPAC Proceedings,
p. 34, University of Massachusetts, 1982.
94. DeVries, K.L. and Igarashi, M., "An EPR Investigation of Environmental
Effects on Polymeric Materials I-Nylon," IUPAC Proceedings, p. 795, University
of Massachusetts, 1982.
93. DeVries, K.L. and Knutson, M.P., "Interfacial Phenomena Associated
with Failure in Dental Materials," Proceedings 17th Annual Conference
Society of Engineering Science, p. 8, 1981.
92. DeVries, K.L., "Adhesive Fracture in Polymers," presented at
the 1981 Polymer Conference Series at University of Detroit, April 1981.
91. DeVries, K.L., "Adhesive Testing and Analysis," presented at
the Workshop on Adhesion held in Conjunction with Society of Adhesion, Annual
Meeting, Savannah, GA, February 1981.
90. DeVries, K.L., "Advances in Plastic Engineering Design," Emerson
Electric Corporate Engineering Conference, St. Louis, MO, June 1981.
89. DeVries, K.L., Miles, H. M., and personnel from Utah Power and Light, "Ice Storage for Air Conditioning," presented before State Utilities
Commission, Salt Lake City, UT, August 1981.
88. DeVries, K.L., "Analysis and Design of Adhesive-Bonded Joints," Presentation at the Workshop on Adhesion - Adhesion Society Conference, Savannah,
GA, February 21-22, 1981.
87. West, H.S. and DeVries, K.L., "The Dependence of Tensile Strength
on Pressure of Oriented Polyethylene," Bulletin of American Physics Society,
263, 1981.
86. Franconi, B.M., Colson, J P., Smith R. H., and DeVries, K.L., "Free
Radicals and New End Groups Resulting from Mechanical Degradation of Polyethylene," Bulletin of American Physics Society, 26:431, 1981.
85. DeVries, K.L., Knutson, M., and Koblitz, F., "Interfacial Phenomena
Associated with the Failure of Dental Materials," Proceedings of the
17th Annual Meeting - Society of Engineering Science, p. 36, December 15-17,
1980.
84. DeVries, K.L., "Fundamentals of Adhesive Evaluation," Proceedings
of Polymer Conference Series, University of Detroit, 1980.
83. DeVries, K.L., "Molecular Phenomena Associated with Fracture," Proceedings of Polymer Conference Series, University of Detroit, 1980.
82. DeVries, K.L., "Fracture in Polymers - Molecular Aspects," Proceedings
of Conference on Chemistry and Physics of Elastomers, University of Akron,
1980.
81. DeVries, K.L. and Anderson, G. P., "Fracture Analysis of Adhesive
Joints," ASCE Convention, Portland, OR, April 14-18, 1980.
80. Miles, H.M., DeVries, K.L., Britt, A.D., and Moniz, W., "Generation
of Free Radicals in Polymer Binders Containing Explosives," Bulletin
of the American Physical Society, 25:321, 1980.
79. Colson, J.P., Franconi, B.M., DeVries, K.L., and Smith, R.H., "Free
Radicals and New End Groups Resulting from Chain Scission in Polyethylene," Bulletin of the American Physical Society, 25:316, 1980.
78. DeVries, K.L., "Testing and Designing with Adhesives," Proceedings
of Conference on Chemistry and Physics of Elastomers, University of Akron,
1980.
77. Igarashi, M. and DeVries, K.L., "An E SR Investigation of Environmental
Effects on Polymeric Fibers," Polymer Preprints, 20:191, 1979.
76. DeVries, K.L., Guest Editor, Polymer Engineering and Science, Symposium
Issue, Vol. 19, 1979.
75. DeVries, K.L., Gustaveson, D., and Smith, R.H., "Review of Experimental
Investigation of Molecular Phenomena Associated with Fracture in Polymers," Poly Preprints, 19:831, 1978.
74. DeVries, K.L., "Molecular Processes Involved in Fracturing Polymers," Presented at the Fifth Annual Spring Symposium, American Vacuum Society, Rochester,
New York, June 1978.
73. DeVries, K.L., "A Discussion of Fatigue Fracture Mechanisms in Engineering
Plastics," ASTM-NBS-NSF Symposium on Fatigue Mechanisms - Final Bulletin,
p. 68, 1978.
72. DeVries, K. L., "Fundamentals of Adhesive Evaluation," Proceedings
of Polymer Conference Series, University of Detroit, May 1-4, 1978.
71. DeVries, K.L., "Molecular Phenomena Associated with Fracture of Polymers," Proceedings of the Polymer Conference on Fundamental of Polymerization and
Characterization, University of Detroit, May 2-6, 1977.
70. DeVries, K.L., "Evaluation and Analysis of Cohesive and Adhesive
Material Behavior--New Opportunities for Research in Energetic Materials," Presented at DOE Meeting, Wrightsville Beach, NC, November 1-3, 1977.
69. DeVries, K.L., "Free Radical Generation During Stresses," Rubber
Fracture, Stabilization, Degradation and Flammability of Polymers," Eighth
Akron Polymer Conference, p. 13, 1977.
68. DeVries, K.L. and Anderson, G.P., "Fracture Mechanics of Joints," Review of Progress in Quantitative NDE, Cornell University, Abstract available
from ARPA-AFML Center for Advanced NDE, Published in Proceedings, June 14-17,
1977.
67. DeVries, K.L., "Fundamentals of Adhesion Evaluation," Proceedings
of the Polymer Conference on Fundamental of Polymerization and Characterizations,
University of Detroit, May 2-6, 1977.
66. DeVries, K.L., "Fracture in Macro-Molecules," Invited Lectures
at l3th Annual Society of Engineering Symposium, Washington, D.C., November
1-3, 1976, Published in Vol. 1, Advances in Engineering Science, NASA Scientific
and Technical Information Office, p. 27, 1976.
65. DeVries, K.L., "Free Radical Processes in Mechanochemical Degradation
of Plastics and Rubber," Proceedings of the IUPAC Meeting, Stockholm,
Sweden, August 29-September 1, 1976.
64. DeVries, K.L. and Roylance, D.K., "ESR and Associated Techniques
in the Study of Polymer Deformation and Fracture," Polymer Preprints,
17:2, 1976.
63. DeVries, K.L., Kelly, F., and Peebles, L., "Federally Sponsored Polymer
Research," Gordon Conference--Elastomers, August 1976.
62. DeVries, K.L., "Molecular Phenomena Associated with Fracture Polymers," Proceedings of the Polymer Conference on Fundamentals of Polymerization and
Polymer Characterization, University of Detroit, May 1976.
61. DeVries, K.L., "A Review of Techniques for Experimental Observation
of Molecular Phenomena Associated with Fracture in Polymers," Polymer
Reprints, 17:100, 1976.
60. DeVries, K.L. and Jacobs, H.R., "An Overview of Geothermal Energy," Proceedings of the Eleventh Intersociety Energy Conversion Engineering Conference,
New York, NY, Published by AIChE, 1976.
59. DeVries, K.L., "Adhesive Fracture, Evaluation and Engineering," Proceedings of 12th Annual Meeting Society of Engineering Science, University
of Texas Publishing Company, p. 197, 1975.
58. DeVries, K.L., "Discussion on Material Production Requirements," NSF Workshop on Advanced Polymer Solids--A Molecular Approach to Composite
Materials, Washington University, St. Louis, MO, 1975.
57. DeVries, K.L., Webb, L., "Environmental Effects on Elastomers," Bulletin of American Physical Society, 20:480, 1975.
56. Roylance, D.K., Lloyd, B A., and DeVries, K.L., "An EPR Investigation
of Molecular Fracture in Aramid Fibers," Bulletin of American Physical
Society, 20:480, 1975.
55. DeVries, K.L., Anderson, G.P., and Williams, M.L., "The Peel Test
in Experimental Adhesive Fracture Mechanics," SESA Spring Meeting, Paper
#2310A, Detroit, MI, May 14-17, 1974.
54. DeVries, K.L., Lloyd, B.A., and Wilde, T.B., "Molecular Correlation
with Fracture in Fibers, Fiber and Granular Filled Composite Reliability Conference,
ASTM, ASME, AIAA, Joint Meeting, Published in Proceedings, Las Vegas, NV,
April 15-16, 1974.
53. Bennett, S.J., Breitling, S.M., DeVries, K.L., and Layton, L.H., "Investigation
of Propellant Chemical Aging Mechanism Using Electron Paramagnetic Resonance," Bulletin of American Physical Society, 19:240, 1974.
52. Bennett, S.J., Breitling, S.M., and DeVries, K.L., "Investigation
of Propellant Chemical Aging Mechanisms Using Electron Paramagnetic Resonance," JANNAF Meeting, Monterey, CA, February 26-28, 1974.
51. DeVries, K.L., "Adhesion and Adhesive Failure of Coatings," Polymer Science for Super Durable Coatings, Plastic Institute of America,
Hoboken, NJ, 1974.
50. DeVries, K.L., "Cohesion and Cohesive Failure of Coatings," Polymer Science for Super Durable Coatings, Plastic Institute of America,
Hoboken, NJ, 1974.
49. DeVries, K.L., Hassell, W.H., and Williams, M.L., "Molecular Mechanics
of Fracture in Oriented Nylon Strips," Bull. American Physical Society,
18:433, 1973.
48. Bennett, S.J., DeVries, K.L., and Williams, M.L., "Effect of Environment
on Adhesive Fracture Energy of Adhesive Dental Materials," Special Issue
Program for National Meeting, 222, 1973.
47. Anderson, G.P., DeVries, K.L., and Williams, M.L., "Analysis of Dental
Test Methods," Journal of Dental Research, Special Issue Program for
National Meeting, 52:185, 1973.
46. DeVries, K.L., Wilde, T.B., and Williams, M.L., "Dewetting and Bond
Rupture During Fracture in Filled Rubbers," Polymer Preprints, 14:463,
1973.
45. Chang, M.D., DeVries, K.L., and Williams, M.L., "Effects of an Elastic-Plastic
Adhesive Layer on Adhesive Fracture," Fracture and Flows, 13th Annual
Symposium, University of New Mexico, p. 92, 1973.
44. Bennett, S.J., Breitling, S.M., and DeVries, K.L., "Chemical Structural
Aging," Chemical Propulsion Structural Integrity Survey, Johns Hopkins
University, 1972.
43. DeVries, K.L., "Crack Initiation as Seen with Electron Spin Resonance," Materials Engineering Congress Abstracts, American Society of Metals, October
14-19, 1972.
42. DeVries, K.L. and Williams, M.L., "Micromechanics of Fracture Initiation
in Highly Oriented and Filled Polymers," Presented at the U.S.- Japan
Joint Seminar on Polymer Solid State, Cleveland, OH, October 9-13, 1972.
41. Bennett, S.J., DeVries, K.L., and Williams, M.L., "Adhesive Fracture
Mechanics," Presented at the 13th International Congress of Theoretical
and Applied Mechanics, Moscow, Russia, appeared in Congress Proceedings, p.
34, 1972.
40. Lloyd, B.A., DeVries, K.L., and Williams, M.L., "A Reaction Rate
Model for Deformation and Fracture in Polymeric Fibers," Proceedings
of the Seventh International Congress of Rheology, Lyon, France, 1972.
39. Chang, M.D., DeVries, K.L., and Williams, M.L., "A Fracture Mechanics
Analysis of the Adhesive Failure of a Lap Shear Joint," Presented at
the 1972 Spring Meeting and Exposition of the Society for Experimental Stress
Analysis, Cleveland, OH, May 23-26, 1972.
38. Despain, R.R., Williams, M.L., and DeVries, K.L., "A Study of Adhesive
and Cohesive Properties of Dental Cements," Presented at the Second Annual
Conference of the Frederick S. McKay Section of the International Association
for Dental Research, Denver, CO, March 17-18, 1972.
37. Dunn, H.K., Andrade, J.D., DeVries, K.L., and King, R., "Polyester
Textile Bioadhesion to Muscle and Bone," Presented at the Symposium on
Materials and Design Considerations for the Attachment of Prostheses to the
Musculo-Skeletal System, Clemson University, Published in Proceedings, April
3-7, 1972.
36. DeVries, K.L., Luntz, R.D., and Williams, M.L., "The Effect of Stress
State on Bond Rupture in Monofilament Nylon 6," Bulletin of the American
Physical Society, 16[II]:1383, 1971.
35. DeVries, K.L., Moore, N.B., and Williams, M.L., "An EPR Study of
Torsionally Loaded Styrene Butadiene Rubber in a Ozone Environment," Bulletin of the American Physical Society, 16[II]:1381, 1971.
34. DeVries, K.L., Anderson, D.P., and Williams, M.L., "Analysis of Dental
Adhesive Test Methods," Presented at Symposium, Engineering for Dental
and Medical American Society of American Institute of Mechanical Engineers,
Detroit, MI, 1971.
33. DeVries, K.L., Despain, R.R., and Williams, M.L., "Evaluation of
Dental Adhesives," Proceedings of the 24th Annual Conference on Engineering
in Medicine, p. 45. The Alliance for Engineering in Medicine and Biology,
Washington, D.C., 1971.
32. Chang, M.D., DeVries, K.L., and Williams, M.L., "The Effect of Plasticity
in Adhesive Fracture," Symposium on Adhesion, American Chemical Society
Meeting, Published in Proceedings, Washington, D.C., 1971.
31. DeVries, K.L., Roylance, D.K., and Williams, M.L., "Formation of
Free Radicals During Mechanical Degradation of Elastomers," Polymer Preprints,
12:580, 1971.
30. DeVries, K.L., "Adhesion to Wet Surfaces," Polymer Conference
Series, College of Engineering, University of Utah, Published in Proceedings,
Salt Lake City, UT, 1971.
29. DeVries, K.L. and Williams, M.L., "Interfacial Contact and Bonding
in Adhesion--Intermolecular Forces," Polymer Conference Series, College
of Engineering, University of Utah, Published in Proceedings, Salt Lake City,
UT, 1971.
28. DeVries, K.L., Luntz, R.D., and Williams, M.L., "A Method of Testing
the Quality of Explosively Welded Metals," Proceedings of the Third International
Conference for High Energy Forming, University of Denver Press, 1971.
27. DeVries, K.L., Lloyd, B.A., and Williams, M.L., "A Reaction Rate
Model for Fracture in Polymeric Fibers," Bulletin of the American Physical
Society, 16:450, 1971.
26. Statton, W.O., Park, J.B., and DeVries, K.L., "Observation of Chain
Rupture During Tensile Testing of Nylon 6 Fibers," Bulletin of the American
Physical Society, 16:450, 1971.
25. DeVries, K.L., "Atomic Scale Experimental Observations of Fracture," Presented at the Akron Polymer Lecture Group, May 7, 1971.
24. DeVries, K.L., "Comparison of Barnacle Cement and Dental Adhesives," Presented at the First Annual Meeting of the Frederick S. McKay Chapter of
the International Association for Dental Research, University of Utah, Salt
Lake City, UT, March 8, 1971.
23. Despain, R.R., DeVries, K.L., Luntz, R.D., and Williams, M.L., "A
Strength Comparison of Barnacle and Commercial Dental Adhesives," International
Association of Dental Research Abstracts, 440, 1971.
22. Pratt, H.R., Brown, W.S., DeVries, K.L., and Brace, W.F., "Effects
of Specimen Size on Strength and Elasticity of Tonalite," Presented at
the American Geophysical Union Meeting, Washington, D.C., April 13, 1971.
21. Williams, M.L., Luntz, R.D., DeVries, K.L., and Despain, R.R., "A
Technique for Evaluating Dental Adhesives," International Association
for Dental Research Abstracts, 439, 1971.
20. DeVries, K.L. and Williams, M.L., "Continuum Mechanics Interpretation
of Adhesive Debonding," Presented at the Ninth Annual Conference on Adhesion
and Adhesives, Washington, D.C., 1971.
19. Brown, R. and DeVries, K.L., and Williams, M.L., "Molecular Bond
Rupture Associated with Inelastic Deformation of Elastomers," Polymer
Preprints, 11:4-28, 1970.
18. Despain, R.R. and DeVries, K.L., and Luntz, R.D., "A Note on Using
EPR to Study Polymerization in Dental Restorative Materials," UTEC DO
70-126, July 1970.
17. Williams, M.L. and DeVries, K.L., "A Continuum Interpretation of
Fracture and Adhesion," Presented at the 1970 Polymer Conference Series,
College of Engineering, University of Utah, Published in Proceedings, Salt
Lake City, UT, May 11-15, 1970.
16. DeVries, K.L., "Effect of Stress, Deformation, and Environment on
Chain Scission in Polymers," Invited lecture presented at the American
Physical Society Meeting, Polymer Division, Dallas, TX, March 23-26, 1970.
15. DeVries, K.L., Simonson, E.R., and Williams, M.L., "A Correlation
Between Fracture Mechanics and Molecular Bond Rupture in Rubber," Proceedings
of the Sixth U.S. Congress of Applied Mechanics, American Society of Mechanical
Engineers, New York, NY, 1970.
14. Williams, M.L. and DeVries, K.L., "Strain Rate and Cyclic Effects
on Bond Rupture During Flow in Polymers," Proceedings of the Fifth International
Congress on Rheology, Shigeharu, Onogi, Ed. 3:l39, 1970.
13. DeVries, K.L., Simonson, E.R., and Williams, M.L., "Electron Paramagnetic
Resonance Measurements of Strain-Induced Ozone Cracking in Rubber," Presented
at the Metals Engineering and Pressure Vessels and Piping Conference, March
31-April 2, 1969, Journal of Basic Engineering Transactions of the American
Society of Mechanical Engineers, 91:587, 1969.
12. DeVries, K.L., Simonson, E.R., and Williams, M.L., "Combined Effects
of Deformation and Ozone on Molecular Bond Rupture in Rubber," Presented
at the Symposium National ACS Meeting, New York, NY, September 7-12, 1969.
11. DeVries, K.L. and Williams, M.L., "Atomic Structure Reveals Why Things
Break," VIA 3 1969.
10. DeVries, K.L. and Williams, M.L., "Electron Paramagnetic Resonance
and Morphology of Fracture," Presented at the Polymer Conference Series,
The Polymer Institute, College of Engineering, Published in Proceedings, University
of Detroit, May 5-June 27, 1969.
9. Despain, R.R., DeVries, K.L., and Williams, M.L., "An EPR Investigation
of Bond Rupture in Teeth and Dental Materials," 47th General Meeting
of the International Association for Dental Research, Houston, TX, March 20-23,
1969.
8. DeVries, K.L. and Williams, M.L., "An Atomic Approach to Fracture
of Polymers," Proceedings of the Seventh Annual ICRPG, Orlando, FL, November
13-15, 1968.
7. Smith, J.L., DeVries, K.L., Bushnell, D.J., and Brown, W.S., "Fracture
Data and Stress-Strain Behavior of Rocks in Triaxial Compression," SESA
Fall Meeting, San Francisco, CA, October 28-November 1, 1968.
6. DeVries, K.L., Roylance, D.K., and Williams, M.L., "Preliminary Investigation
of Fracture Using EPR," ICRPG Supplement, 1968.
5. Smith, J.L., DeVries, K.L., Bushnell, D.J., and Brown, W.S., "The
Strength Properties of Rock in Triaxial Compression," Lawrence Radiation
Laboratory, Livermore, CA, September 1967.
4. Brown, W.S., DeVries, K.L., and Smith, J.L., "Technical Report No.
AFWL-TR-66-124, Air Force Systems Command, Kirkland Air Force Base, NM, January
1967.
3. DeVries, K.L. and Rowland, S.C., "Effect of Hydrostatic Pressure on
Fatigue in Metals," AIME Annual Meeting, New York, NY, 1966.
2. Stephenson, R.L., Hammond, S.B., DeVries, and K.L., Burt, D.A., "Direct
In-Situ Measurements of Wake Characteristics of Re-Entry Vehicles, AFRCRL
64-276, ARPA Order 254-62, 1964.
1. Hall, H.T., DeVries, K.L., Baker, G.S., and Gibbs, P., "The Effect
of Pressure on Mechanical Properties," Bulletin of American Physical
Society, 4:132, 1959. |
|
|
|
|
|
|
|