Home

Research

People

Publications

Teaching

Resources

Publications / Patents

In press / accepted for publication:

Shah A, Mufti NA, Rakwal D, Bamberg E (in press). Material removal rate, kerf, and surface roughness of tungsten carbide machined with wire electrical discharge machining. Journal of Materials Engineering and Performance. DOI: 10.1007/s11665-010-9644-y

 

2010

Heamawatanachai S, and Bamberg E (2010). Cutting force model of orbital single-point micromachining tool. International Journal of Machine Tools & Manufacture 50(9), pp. 815-823. DOI: 10.1016/j.ijmachtools.2010.05.002

Bamberg E, Corbin B, Bamberg SJM, Hawker C, and Williams R (2010). Through-container optical evaluation system. United States Patent # 7,688,448 (issued March 30, 2010)

 

2009

Tathireddy P, Rakwal D, Bamberg E, and Solzbacher F (2009). Fabrication of 3-dimensional silicon microelectrode arrays using micro electro discharge machining for neural applications. In: Proc. Transducer’09, 15th Int. Conf. on Solid-State Sensors, Actuators and Microsystems, Denver, CO, June 21-25, 2009, pp. 1206-1209.

Heamawatanachai S, and Bamberg E (2009). Design and characterization of a PZT driven micromachining tool based on single-point tool tip geometry. Precision Engineering 33(4), pp. 387-394. DOI: 10.1016/j.precisioneng.2008.10.006.

Rakwal D, and Bamberg E (2009). Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining. Journal of Materials Processing Technology 209(8), pp. 3740-3751. DOI: 10.1016/j.jmatprotec.2008.08.027.

Rakwal D, Heamawatanachai S, Tathireddy P, Solzbacher F, and Bamberg E (2009). Fabrication of compliant high aspect ratio silicon microelectrode arrays using micro-wire electrical discharge machining (micro-WEDM). Microsystem Technologies 15(5), pp. 789-797. DOI: 10.1007/s00542-009-0792-7.

Rakwal D, and Bamberg E (2009). Electrical discharge machining promises high-quality, lower-cost substrates. Compound Semiconductor, March 2009, pp. 17-18.

Bamberg E, and Heamawatanachai S (2009). Orbital electrode actuation to improve efficiency of drilling micro-holes by micro-EDM. Journal of Materials Processing Technology 209(4), pp. 1826-1834. DOI: 10.1016/j.jmatprotec.2008.04.044.

 

2008

Liu X, Corbin BJ, Bamberg SJM, Provancher WR, and Bamberg E (2008). Optical system to detect volume of medical samples in labeled test tubes. Optical Engineering 47(9), 094402. DOI: 10.1117/1.2978953

Bamberg E, and Rakwal D (2008). Experimental investigation of wire electrical discharge machining of gallium-doped germanium. Journal of Materials Processing Technology 197(1-3), pp. 419-427. DOI: 10.1016/j.jmatprotec.2007.06.038

Howe M, and Bamberg E (2008). Optical closed loop control for the precision grinding of micro-EDM electrodes. In: Proc. 2008 ASPE Conf., Portland, OR, Oct. 19-24, 2008, pp. 192-195.

 

2007

Bamberg E, and Heamawatanachai S (2007). A novel micromilling technology based on single-point tip geometries. In: Proc. 2007 ASPE Conf., Dallas, TX, October 14-19, 2007, pp. 28-31.

Tschaggeny C, Jones W, and Bamberg E (2007). High performance piezoelectric actuated gimbal (HIERAX). In: Proc. 49th Annual Meeting of the Idaho Academy of Science, Idaho Falls, ID, April 19-21, 2007. http://www.osti.gov/servlets/purl/923493-SLWiCl/.

Rakwal D, and Bamberg E (2007). Using Taguchi methods to optimize the slicing rate and surface roughness for wire electrical discharge machining of p-type germanium. In: Proc. 15th International Symposium on Electromachining (ISEM XV), Pittsburgh, PA, April 23-27, 2007, pp. 127-132.

 

2006

Bamberg E, Grippo CP, Wanakamol P, Slocum AH, Boyce MC, and Thomas EL (2006). Device for in situ atomic force microscope mechanical testing. Precision Engineering, 30(1), pp. 71-84. DOI: 10.1016/j.precisioneng.2005.05.001.

Orino C, Rakwal D, Jorgensen JD, and Bamberg E (2006). Development of a precision, low-cost, small footprint wire electron discharge machine (WEDM). In: Proc. 2006 ASPE Conf., Monterey, CA, October 15-20, 2006, (26), pp. 239-242.

Heamawatanachai S, Corbin B, Emig L, and Bamberg E (2006). Flexure-based meso-level stages driven by linear piezo motors. In: Proc. 2006 ASPE Conf., Monterey, CA, October 15-20, 2006, (26), pp. 135-138.

Hawker C, Roberts W, Ring T, Choi B, Bamberg E, Corbin B, and DaSilva A (2006). Unique automation systems in a high volume clinical reference laboratory. In: Annals of the Association of Clinical Scientists, 36(2), p. 228.

 

2005

Bamberg E, Heamawatanachai S, and Jorgensen JD (2005). Flexural micro-EDM head for increased productivity of micro-holes. In: Proc. 2005 ASPE Conf., Norfolk, VA, October 10-14, 2005, pp. 82-85.

Rakwal D, and Bamberg E (2005). Design guidelines for spherical aerostatic bearings. In: Proc. 2005 ASPE Conf., Norfolk, VA, October 10-14, 2005, pp. 170-173.

Bamberg E, and Hoskere S (2005). CoM-SiM - conceptual machine design simplification modeler. In: Proc. 2005 Euspen Conf., Montpellier, France, May 8-11, 2005 (2), pp. 417-420.

 

2003

Bamberg E, Grippo CP, Slocum AH, and Boyce MC (2003). Design and manufacture of a tensile test machine for in-situ atomic force microscope mechanical testing. In: Proc. 2003 Euspen Conf., Aachen, Germany, May 19-20, 2003 (2), pp. 427-430.

 

2002

Bamberg E, and Slocum AH (2002). Concrete-based constrained layer damping. Precision Engineering, 26(4), pp. 430-441. DOI: 10.1016/S0141-6359(02)00120-4.

Thomas EL, Wanakamol P, Ha YH, Grippo CP, Bamberg E, and Boyce MC (2002). Main influence of grain boundaries on the deformation behavior of block copolymers. Materials Research Society Symposium, Boston, MA, Dec. 2-4, 2002 (734).

Sandhu J, Bamberg E, Hong JW, and Boyce MC (2002). Active engagement pedagogy for an introductory solid mechanics course. In: Proc. 2002 ASEE Conf., Montreal, QC, June 16-19, 2002, pp. 12491-12501.

 

Before 2002

Bamberg E, and Slocum AH (2001). Concrete-based constrained layer damping. In: Proc. 2001 JSPE Conf., Yokohama, Japan, July 12-19, 2001, pp. 544-548.

Sandhu J, Bamberg E, and Boyce MC (2001). Development of interactive web-based modules in re-designing an introductory solid mechanics course. In: Proc. 2nd Int. Conf. in Teaching & Learning in Higher Education (CTLE), Samos Island, Greece, June 24-27, 2001, pp. 289-293.

Bamberg E, and Slocum AH (2000). Rapid machine design. In: Proc. 2000 ASPE Conf., Scottsdale, AZ, October 22-27, 2000 (22), pp. 308-311.

Bamberg E (2000). Principles of Rapid Machine Design. Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, USA, June 2000.


Home || Research || People || Publications || Teaching|| Resources

Last updated: Wed, 23-Jun-2010 20:39
Copyright 2008 Precision Design Lab